TiLite 2GX Folding Titanium Wheelchair

(Consists of four Tie-Down Brackets. Unoccupied Use Only.) (Not Available when Swing Away frame and Heavy Duty Frame are both selected. Not available with Swing Away Tubular Armrest or Swing Away -Flip Back Tubular Armrests.
Requires a minimum seat depth of 14” or 15” seat Depth with Hemi Height Frame.)

Frame Finishes:

Seat Width (A):

Measure from outside of seat tube at back post to the outside of the opposite seat tube at back post.

Seat Depth (B):

Measure from 1/2” in front of back post to the front edge of seat sling. (12”-14” Seat Depths (B) not available with 25” (559) and 26” (560) Rear Wheels.)

Seat Depth (B):

Measure from 1/2” in front of back post to the front edge of seat sling. (12”-14” Seat Depths (B) not available with 25” (559) and 26” (560) Rear Wheels.)

Front Seat Height (C):

Measure from floor to top of seat tube at beginning of bend. Adjustable in 1/2” increments.(13.5” – 14” Front Seat Height (C) requires Hemi Height Frame Style. 20.5” – 21” Front Seat Height (C) not available with Hemi Height Frame Style.)

Rear Seat Height (D):

Measure from floor to top of seat tube at back post. Adjustable in 3/8” increments.

XSB16 – Depth Adjustable Back/ Frame – (Not Available with Hemi Height Frame, Heavy Duty Frame, 19” or 20” Seat Depths B, Swing AwayTubular or SwingAway Flip-Back Armrest. Seat Depths B of 12”-17” allow 3” of rearward adjustment. Seat Depth B of 18” allow 2” of rearward adjustment. Requires Tension Adjustable Seat Upholstery)

Folding Angle Adjustable Back Options:

XSB16 ❑ Depth Adjustable Back/Frame (Not Available with Hemi Height Frame, Heavy Duty Frame, 19” or 20” Seat Depths B,Swing Away Tubular or Swing Away Flip-Back Armrest. Seat Depths B of 12”-17” allow 3” of rearward adjustment. Seat Depth B of 18” allow 2” of rearward adjustment. Requires Tension Adjustable Seat Upholstery) NCO

Seat Back Height (E):

Measure from top of back post to top of seat tube at rear of frame.

Camber (F):

Front Frame Angle (H):

Measure from inside of front frame tube to top of bottom frame tube.

Seat to Footrest Length (I):

Measure from front edge of seat sling to top rear of footrest

Available w/24” Mag Wheels only. Rear Seat Height, Camber or axle restrictions may apply. Drive Handrim available w/standard Aluminum Handrim Only.

Rear Wheel Type:

XRW17 X-Core Mag (Not available with Heavy Duty Frame, Short Tabs, Quad Release Axles or Spoke Guards. Available with Aluminum Sliver Anodized Handrims only.) NCO ❑ 22”(501) ❑ 24”(540)

ZRW9 – Spinergy Design Lab LX Wheels (If same color is selected, anodized hubs and rims match color anodized package on page 1. Available with black spokes only.)

Frame Finish: