Home :: Wheelchair Cushions & Backs :: Comfort Company Wheelchair Cushions :: Comfort Company M2 Zero Elevation Cushion

Comfort Company M2 Zero Elevation Cushion

Comfort Company M2 Zero Elevation Cushion
 
(0 reviews)  

Price is not the only factor to consider when buying Comfort Company M2 Zero Elevation Cushion, the fast delivery from Sportaid is a crowd please!

 

3D QUADRA GEL - the quadra 3D gel pack reduces shear force and heat buildup. Four 3D compartments allow for even distribution of gel under the ischials and seated areas. Coccyx relief cutout. Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanter shelves. Dual density foam provides a soft entry layer for comfort and a molded foam base layer for support and pressure distribution. Tapered leg adductors, in conjunction with medial thigh separator and deep leg troughs, promote proper leg alignment. Three styles are available: ZERO ELEVATION - Allows for greater freedom of movement for standard positioning issues. ANTI-THRUST - Provides anterior pelvis build-up to prevent forward migration. WEDGE -Controls forward leaning by adding slight anterior height. Covers- STRETCH-AIR FABRIC — designed for air transmission and heat reduction. This two-ply, breathable laminate combines a highstretch polyester top layer with a waterproof, breathable vapor barrier. COMFORT-TEK — fluid proof exterior has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion. Comfort-Tek has multidimensional stretch and helps alleviate pressure on bony prominences.

Features:
 

  • Four Gel Compartments
  • Coccyx Relief Cutout
  • Tapered Leg Adductors, Medial Thigh Seperator, Deep Leg Troughs
  • Three cushion styles available:
    • Zero Elevation - The M2 Zero Elevation cushion allows for greater freedom of movement for standard positioning issues.
    • Anti-thrust - The M2 Anti-Thrust cushion provides anterior pelvic build-up to prevent forward migration.
    • Wedge - The M2 Wedge cushion controls forward leaning by adding slight anterior height.
  • Two cushion cover styles available:
    • Stretch-Air Fabric - designed for air transmission and heat reduction. This two-ply, breathable laminate combines a highstretch polyester top layer with a waterproof, breathable vapor barrier.
    • Comfort-Tek - fluid proof exterior has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion. Comfort-Tek has multidimensional stretch and helps alleviate pressure on bony prominences.
Find a lower price and Sportaid will Beat it!
20%
Stock#
COMF-M2-ZERO
Retail:
$312.00
Cost:
$249.60
Click here to be notified of price drops of this item
 
Choose Width x Depth  
Choose Cover Type  
Buy Extra Cover  
Buy Extra Incontinent Inner Liner  

Cost:
$249.60
Qty
Click here to subscribe for 'Back-in-stock' notifications
Click here to be notified when this item is nearly out of stock
: *
: *
: *
 
Halt Dog Repellent
$6.50
StimuLITE Ventilated Honeycomb Pillow
$296.00
Jay J2 Standard Ballistic Wheelchair Cushion Cover
$42.30
Coloplast - Mentor Soft Catheters Straight MT-110- MT-116 bx/30
$29.00
Pride Go-Go Elite Traveller Plus, 4 Wheeled Scooter
$1,229.00
EZ-Access Rubber Threshhold Ramps
$157.25
Shadow Wheel by Out-Front
$264.00
Varilite Meridian Wave Cushion - Incontinence Cover
$60.00
There have been no reviews


 

   M2: ZERO ELEVATION
   stretch-air pt #          comfort-tek pt #       width x length    front       rear   abductor     leg trough    wt. limit
   M2-S-1616              M2-F-1616               16” x 16”           3.5”         3”       4.5”            3”                250 lbs.
   M2-S-1618              M2-F-1618               16” x 18”           3.5”         3”       4.5”            3”                250 lbs.
   M2-S-1620              M2-F-1620               16” x 20”           3.5”         3”       4.5”            3”                250 lbs.
   M2-S-1816              M2-F-1816               18” x 16”           3.5”         3”       4.5”            3”                300 lbs.
   M2-S-1818              M2-F-1818               18” x 18”           3.5”         3”       4.5”            3”                300 lbs.
   M2-S-2016              M2-F-2016               20” x 16”           3.5”         3”       4.5”            3”                350 lbs.
   M2-S-2018              M2-F-2018               20” x 18”           3.5”         3”       4.5”            3”                350 lbs.
   M2-S-2020              M2-F-2020               20” x 20”           3.5”         3”       4.5”            3”                350 lbs.
   M2-S-2216              M2-F-2216               22” x 16”           3.5”         3”       4.5”            3”                350 lbs.
   M2-S-2218              M2-F-2218               22” x 18”           3.5”         3”       4.5”            3”                400 lbs.
   M2-S-2220              M2-F-2220               22” x 20”           3.5”         3”       4.5”            3”                400 lbs.
   M2-S-2416              M2-F-2416               24” x 16”           3.5”         3”       4.5”            3”                400 lbs.
   M2-S-2418              M2-F-2418               24” x 18”           3.5”         3”       4.5”            3”                400 lbs.
   M2-S-2420              M2-F-2420               24” x 20”           3.5”         3”       4.5”            3”                400 lbs.


 

Two cushion cover styles available:

1) Stretch-Air Fabric - designed for air transmission and heat reduction. This two-ply, breathable laminate combines a highstretch polyester top layer with a waterproof, breathable vapor barrier.

2) Comfort-Tek - fluid proof exterior has supple leathery properties that provide an easily cleaned surface and protection for the inner cushion. Comfort-Tek has multidimensional stretch and helps alleviate pressure on bony prominences.

 

 



 

Gift certificates